Junckers TapePrimer has been developed to overcome the issues created when using temporary adhesive tapes which may damage the lacquered surface of wooden floors.
TapePrimer must be applied prior to putting down temporary strong adhesive tapes or stickers and will enable them to be easily removed when the tapes are no longer required, thereby eliminating damage.
The product is recommended for use on prefinished lacquered wooden sports floors or other areas where supplementary line markings or perimeter advertisements are of short time relevance only.
Tape Primer skyddar golvet när du använder tillfällig tejp för linjemarkeringar eller självhäftande logotyper och bokstäver.
Coverage: 30-40 m² per litre.
Before application: Shake well before use.
Short haired mohair roller or brush.
Surface temperature: Minimum 15° C.
Dilution: The product is supplied ready for use.
Cleaning of tools: Soap and water immediately after use
Storage: Shelf life 1 year in unopened can and stored at 20° C. Not to be exposed to temperatures below 0° C.
Clean off any contaminants from the surface to be treated using Junckers SylvaCleaner or Junckers SylvaSport Cleaner.
When the surface is dry, TapePrimer must be applied to the floor at the recommended coverage rate. Allow to dry fully before applying the adhesive tape. Please note that high levels of humidity will increase the drying time of the TapePrimer.
Application of Adhesive Tape or Stickers:
Carefully apply the tape or stickers on top of the dried TapePrimer. Make sure they are applied in one action. Repositioning the tape or stickers will remove the primer.
Removal of Adhesive Tape or Stickers:
When the tape or stickers are no longer required, carefully peel them off and clean the floor.
Before use of the product, read the label on the container carefully and observe the advised precautionary safety measures.